IBC / SBC

Vertical agitator with coaxial geared motor

PRESENTATION

The vertical IBC agitators are widely used in wastewater treatment due to their high efficiency, high degree of agitation and low cost.

The great versatility of these equipments lies in the different sizes and types of propellers that can be used in addition to the coaxial gear motor system that allows a wide range of speed selection. In the same line, the vertical SBC agitators with their larger size are able to provide the required agitation even in high volume applications.

Its design varies according to the application and the required mixing characteristics, and one or more propeller of the same or different type can be used, thus providing the degree of mixing required for each application. This versatility makes the IBC/SBC agitators the ideal equipment for physical-chemical or biological treatments.

APPLICATIONS

Sludge homogenization, Lime slurry preparation for pH adjustment, Flocculant preparation, Flocculation tanks, Additive suspensions, Waste water homogenization, Temperature homogenization.

ADDITIONAL INFORMATION

Technical_Sheet_IBC / SBC_En.pdf

CHARACTERISTICS

Finishing level: Industrial
Square anchorage flange
Coaxial Geared Motor
Interchangeability of mixing components
Easy assembly / disassembly

MATERIALS

Contact parts in AISI 304L stainless steel
Non-contacting parts in Carbon Steel and others

OPTIONS

Other materials: AISI 316L / Carbon steel
Plastic shaft and propeller coatings
Other anchorage flanges
Tripod guides
Extra weather protection
Control panel

SELECTION CHART FOR FOR SLUDGE SUSPENSION 

Volume

Modelos

Drive

Ø Shaft mm

Length. Max. mm

Ø Propeller mm

Weight Kg
300 IBC 0,18-75/300 Geared motor 20 1000 300 12
500 IBC 0,25-100/300 Geared motor 20 1500 300 15
1000 IBC 0,37-100/350 Geared motor 25 1500 350 18
1500 IBC 1,1-100/400 Geared motor 30 1800 400 27
2500 IBC 1,5-100/600 Geared motor 35 1800 600 30
4000 IBC 1,5-120/600 Geared motor 45 2000 600 30
5000 IBC 2,2-90/800 Geared motor 45 2250 800 47
7500 IBC 2,2-90/800 Geared motor 50 2500 800 60
10000 SBC 2,2-65/1000 Geared motor 60 3500 1000 80
15000 SBC 4-75/1000 Geared motor 60 3500 1000 90

TABLA DE SELECTION CHART FOR FLOCULATION

Volume

Models

Drive

Ø Shaft mm

Length. Max. mm

Ø Propeller mm

Weight Kg
2500 IBC 0,18-35/400 Geared motor 20 1000 300 12
5000 IBC 0,25-35/600 Geared motor 20 1500 300 15
7500 IBC 0,25-35/700 Geared motor 25 1500 350 18
10000 IBC 0,25-25/800 Geared motor 30 1800 400 27
15000 IBC 0,37-20/1000 Geared motor 35 1800 600 30
20000 IBC 0,37-20/1200 Geared motor 45 2000 600 30
30000 SBC 0,37-18/1400 Geared motor 45 2250 800 47
40000 SBC 0,37-15/1800 Geared motor 50 2500 800 60
50000 SBC 0,37-10/2000 Geared motor 60 3500 1000 80

 

For more information, fill out the following form:

Basic information on data processing (Regulation (EU) 2016/679 and Organic Law 3/2018)

Party responsible for data processing: Flowmim, SL.

Purpose: To offer, provide and invoice our services and products.

Lawful basis for processing: Consent of the data subject.

Recipients: The data will not be transferred to third parties, unless its transfer is required by law or is necessary in order to fulfil the purpose of the processing.

Rights: Access to, rectification of and erasure of data, along with all the other rights listed in the data protection policy.

More information in our data protection policy.

* Required fields

You may also be interested in: