LECOR / LMRE

Horizontal agitator

PRESENTATION

LECOR and LMRE lateral agitators are highly suitable for maintaining and mixing products stored in medium and large volume tanks. They are installed in the lowest part of the vessel with different distances to the bottom, and slanted in line with the characteristics of the tank (shape and size).

LMRE and LECOR are fitted with two systems of shaft sealing. On the inner part, where the shaft is in contact with the product, there is a mechanical seal, whilst the external part can be fitted with a stuffing box.

Propeller design and selection is done according to agitation requirements, product properties, vessel geometry and agitator location in order to achieve optimal performance with the lowest operating costs.

APPLICATIONS

Heat exchanges, Chemical reactions, Dissolutions, Dilutions, Reactant mixing, Product homogenisation (oils, sludge, slurries, waste water, urea, etc., Product/suspension maintenance (ammonium sulphate, glues, melamine, latex, resins, etc.)

ADDITIONAL INFORMATION

Technical_Sheet_LECOR / LMRE_En.pdf

CHARACTERISTICS

DIN 2576 anchor flange Level of finish: Industrial
Gearbox with high performance
helicoidal gears
Single mechanical seal sealing system
GAMMA/MARINE propeller
Simplicity of parts  

MATERIALES

Shaft and propeller manufactured in stainless steel AISI 316L
Mechanical seal C/C/N
 

OPTIONS

Control panel
Safety stuffing box
Mechanical seal S/S/V or dual
Shaft and propeller covering against corrosion and wearing up
Motor cover
Other materials
Big flow GAMMA propeller
Other anchor systems
Other shaft length

SELECTION CHART FOR LECOR

Models

Characteristics

Power

Speed

Ø Propeller

Propeller

Ø Shaft

LECOR 0.37-135/300 Coaxial Geared Motor 0.37kW 135rpm 300mm Marina 40mm
LECOR 0.55-200/300 Coaxial Geared Motor 0.55kW 200rpm 300mm Marina 40mm
LECOR 0.75-200/400 Coaxial Geared Motor 0.75kW 200rpm 400mm Marina 40mm
LECOR 1.1-250/400 Coaxial Geared Motor 1.1kW 250rpm 400mm Marina 40mm
LECOR 1.5-200/500
Coaxial Geared Motor 1.5kW 200rpm 500mm Marina 40mm
LECOR 2.2-250/500
Coaxial Geared Motor 2.2kW 250rpm 500mm Marina 40mm
LECOR 3-200/600
Coaxial Geared Motor 3kW 200rpm 600mm Marina 50mm
LECOR 4-200/650
Coaxial Geared Motor 4kW 200rpm 650mm Marina 60mm

SELECTION CHART FOR LMRE

Models

Characteristics

Power

Speed

ø Propeller

Propeller

Ø Shaft

LMRE 0.55-300/275 Parallel Geared Motor 0.55kW 300rpm 275mm Gamma 35mm
LMRE 0.75-300/300 Parallel Geared Motor 0.75kW 300rpm 300mm Gamma 40mm
LMRE 1.1-300/325 Parallel Geared Motor 1.1kW 300rpm 325mm Gamma 40mm
LMRE 1.5-300/350
Parallel Geared Motor 1.5kW 300rpm 350mm Gamma 40mm
LMRE 2.2-300/400
Parallel Geared Motor 2.2kW 300rpm 400mm Gamma 40mm
LMRE 3-300/450
Parallel Geared Motor 3kW 300rpm 450mm Gamma 50mm
LMRE 4-300/500
Parallel Geared Motor 4kW 300rpm 500mm Gamma 50mm
LMRE 5,5-300/500
Parallel Geared Motor 5kW 300rpm 500mm Gamma 60mm
LMRE 7,5-300/500
Parallel Geared Motor 7.5kW 300rpm 600mm Gamma 60mm
LMRE 9,2-300/600
Parallel Geared Motor 9,2kW 300rpm 600mm Gamma 60mm
LMRE 11-300/650
Parallel Geared Motor 11kW 300rpm 650mm Gamma 60mm
LMRE 15-300/700
Parallel Geared Motor 15kW 300rpm 700mm Gamma 70mm
LMRE 18,5-300/700
Parallel Geared Motor 18,5kW 300rpm 700mm Gamma 70mm